HomeProductsTransponder-coded safety switches without guard lockingCES-AR safety switchCES-AR-C01-EH-SA
CES-AR-C01-EH-SA (Order no. 098582)
Choose content
Safety switch CES-AR-C01-..., RFID, plug connector(s) M12
- Fixcode evaluation
- Monitoring output door position OUT
- Plug connector M12, 8-pin
Description
Approach direction and installation position
1 active face, adjustable in 5 directions
Typical actuating ranges
With actuators CES-A-BBA and CES-A-BCA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 4 mm must be maintained so that the actuating range of the side lobes is not entered.
With actuator CES-A-BPA
For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.
Attention:
The actuating range may vary depending on the actuator, substrate material and installation situation. Further actuating ranges can be found in the operating instructions.
Fixcode evaluation
A supplied actuator is permanently assigned to the switch. The switch can only be actuated with this actuator. The teach-in operation of the actuator is carried out at EUCHNER before delivery. No other actuators can be taught-in.
The system has a high coding level.
Safety characteristics
Thanks to two redundant safety outputs (semiconductor outputs) with internal monitoring, the device is suitable for:
- Category 4 /PL e according to EN 13849-1
- SIL 3 according to EN IEC 62061 Table 4
The OSSD outputs used check their function for short circuits and short circuits with test pulses.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Terminal assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | IB | Enable input, channel B | WH |
| 2 | UB | Electronics operating voltage, 24 V DC | BN | |
| 3 | OA | Safety output, channel A | GN | |
| 4 | OB | Safety output, channel B | YE | |
| 5 | OUT | Monitoring output | GY | |
| 6 | IA | Enable input for channel A | PK | |
| 7 | 0 V | Weight 0 V DC | BU | |
| 8 | RST | Reset input | RD |
Plug connector(s) adjusted C01
Plug connector(s) adjustable in 6 orientations.
Scope of delivery
- 2 x safety screws M5x10
- Actuator CES-A-BPA-098775
Dimensional drawings
| 1 | Active face |
Connection examples
Technical data
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | 10 % |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 75 V (Tested up to 75 V by employers' liability insurance association) |
| Rated impulse voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 400 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 5 ms |
| Safety class | III |
| Current consumption | |
| no load on outputs | max. 50 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OUT | |
| Output type | p-switching, short circuit-proof |
| Output voltage | 0.8 x UB ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| Switching current | max. 200 mA |
| Safety outputs OA / OB | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| HIGH U(OA,OB) | UB-1.5 ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| LOW U(OA,OB) | 0 ... 1 V DC |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24V 400mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 400 mA |
| Test pulse duration | max. 1 ms |
Mechanical values and environment
| Connection type | M12 plug connector, 8-pin |
| Tightening torque | |
| Fixing screws | max. 1 Nm |
| Ready delay | 10 s |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Storage temperature | -25 ... 70 °C |
| Mounting distance | min. 40 mm |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67 |
| Ambient temperature | -20 ... 55 °C |
| Material | |
| Housing | Plastic, PBT |
Miscellaneous
| Notices for UL approval | Operation only with UL Class 2 power supply or equivalent measures |
Actuator CES-A-BPA-098775 (Order no. 098775)
Workspace
| Actuator distance s | |
| Minimum distance for side approach direction | min. 6 mm |
| Switch-on distance | |
| with center offset m=0 | 22 mm (for surface mounting of the actuator on metal) |
| Secured switch-off distance sar | |
| with center offset m=0 | max. 58 mm (for surface mounting of the actuator on metal) |
| Secured switching distance sao | |
| with center offset m=0 | min. 18 mm (for surface mounting of the actuator on metal) |
| Switching hysteresis | |
| with center offset m=0 | 1 ... 2 mm (for surface mounting of the actuator on metal) |
Electrical connection values
| Power supply | Inductive via read head |
Mechanical values and environment
| Tightening torque | |
| Fixing screws | max. 1 Nm |
| Storage temperature | -25 ... 70 °C |
| Degree of protection | IP65/IP67/IP69/IP69K |
| Ambient temperature | -25 ... 70 °C |
| Material | |
| Housing | Plastic (PBT) |
Components included in the set
| Included accessories | 2x safety screws M5x10 |
In combination with actuator CES-A-BPA-098775
| Switch-on distance | 22 mm (on surface mounting on aluminum. In a non-metallic environment, the typical operating distances increase to 30 mm) |
| Secured switch-off distance sar | max. 58 mm |
| Secured switching distance sao | min. 18 mm |
| Switching hysteresis | 1 ... 2 mm |
Accessories
Connection material
Y-distributor M12 with connecting cable, without IO-Link evaluation
111696
AC-YD-V0,2-SBB-111696
AC-YD-V0,2-SBB-111696
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 0.2 m
112395
AC-YD-V1,0-SBB-112395
AC-YD-V1,0-SBB-112395
- For series connection of AR/BR safety switches in switch chains without IO-Link evaluation
- Y-distributor M12 with connecting cable, 2 x 5-pin, 1 x 8-pin
- Straight plug connector
- PVC cable
- Cable length 1 m
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Download Complete Package (ZIP, 14,8 MB)
Single Documents
Declarations of conformity
Instructions
Operating Instructions Non-Contact Safety Switch CES-AR-C01-... (Unicode/Multicode/Fixcode)
Doc. no.
Version
Language
Size
Operating Instructions Non-Contact Safety Switch CES-AR-C01-... (Unicode/Multicode/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
1,6 MB
Mode d'emploi Interrupteur de sécurité sans contact CES-AR-C01-... (unicode / multicode/ code fixe)
Doc. no.
2098039
Version
20-02/20
Language
Size
1,6 MB
Manual de instrucciones Interruptor de seguridad sin contacto CES-AR-C01-... (Unicode/Multicode/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
1,6 MB
Betriebsanleitung Berührungsloser Sicherheitsschalter CES-AR-C01-... (Uni-/Multi-/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
1,6 MB
Istruzioni di impiego Finecorsa di sicurezza senza contatto CES-AR-C01-... (Uni-/Multi-/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
1,6 MB
使用说明书 非接触式安全开关 CES-AR-C01-⋯ （特殊/通用/固定编码）
Doc. no.
2098039
Version
20-02/20
Language
Size
2,1 MB
Инструкция по эксплуатации Бесконтактный предохранительный выключатель CES-AR-C01-... (Uni-/Multi-/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
2,1 MB
Návod k použití Bezkontaktní bezpečnostní spínač CES-AR-C01-... (Unicode/Multicode/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
2,8 MB
Érintkezésmentes biztonsági kapcsoló CES-AR-C01-… (Uni-/multi-/állandó kód)
Doc. no.
2098039
Version
20-02/20
Language
Size
1,6 MB
İşletim kılavuzu Temassız emniyet şalteri CES-AR-C01-... (Uni-/Multi-/Fixcode)
Doc. no.
2098039
Version
20-02/20
Language
Size
2,0 MB
Instrucţiuni de utilizare Întrerupător de siguranţă fără contact CES-AR-C01-... (cod unic/mai multe coduri/cod fi x)
Doc. no.
2098039
Version
20-02/20
Language
Size
2,8 MB
Other Documents
Application examples
Approvals and certificates
c UL us
Doc. no.
Version
Language
Size
c UL us
Doc. no.
Version
Language
Size
0,3 MB
c UL us
Doc. no.
Version
Language
Size
0,2 MB
Sales documents
Flexibel sicher - Transpondercodierte Sicherheitssysteme CES
Doc. no.
Version
Language
Size
Flexibel sicher - Transpondercodierte Sicherheitssysteme CES
Doc. no.
119922
Version
06-06/22
Language
Size
8,4 MB
Flexibly safe - Transponder-coded safety systems CES
Doc. no.
Version
Language
Size
Flexibly safe - Transponder-coded safety systems CES
Doc. no.
120233
Version
06-06/22
Language
Size
7,3 MB
CAD data
Ordering data
| Ordernumber | 098582 |
| Item designation | CES-AR-C01-EH-SA |
| Gross weight | 0,22kg |
| Customs tariff number | 85365019000 |
| ECLASS | 27-27-24-03 Safety-related transponder switch |
