Euchner Site Map
- - For over 40 years Euchner & Co. has been a supplier of quality safety and man/machine interface products to the automotive, machine tool, packaging, textile, woodworking, robotics, plastic and process control industries throughout the world.
- Safety
- Safety Switches
- - Due to its small design, the safety hinge ESH is particularly suitable for applications in which robustness is required in combination with small dimensions.
- E-Stops - Emergency Stop Devices ES… as per EN ISO 13850 the emergency stop function is intended to avert an impending hazard for personnel, damage to machine or work in progress, or to alleviate existing hazards, and that is to be triggered by a single user action.
- NM Design Type 1 Safety Limit Switches - plastic, 2 narrow body designs, up to 3 contacts, 6 different actuator heads.
- NZ Design Type 1 Safety Limit Switches - die cast aluminum, up to 4 contacts and 10 different actuator heads.
- NZ..VZ..VS Design Type 2 Safety Switches - die cast aluminum, with up to 4 contacts, side actuator entry with 30 mm mounting.
- Multifunction Gate Box (MGB) - MGB is a unique interlocking or guard locking system for the protection of safety doors on machines and systems.
- STA Design Type 2 Safety Switches - EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has dissipated.
- STM Design Type 2 Safety Switch - plastic body with plastic or metal actuator head, solenoid locking, 3 contacts, 21 and 22 mm mounting.
- STP Design Type 2 Safety Switches - plastic body with metal actuator head, solenoid locking, 4 contacts and 30 mm mounting.
- STP extended - The STP Extended switch allows the integration of control and display elements in the switch. It can also prevent damage to a part or material in process due to an inadvertent machine shutdown.
- STP TWIN Design Type 2 Safety Switches - EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has passed.
- TK Design Type 2 Safety Switches - EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has dissipated
- TP Series Solenoid Locking Safety Switches - plastic, solenoid locking, up to 4 contacts, top & side actuator entry and 30 mm mounting.
- TX Series Solenoid Locking Safety Switch - die cast aluminum, solenoid locking, up to 4 contacts, side actuator entry with 30 mm mounting.
- TZ Series Solenoid Locking Safety Switch - die cast aluminum, solenoid locking, up to 4 contacts, side actuator entry with 100 mm mounting.
- TZ extended - The TZ extended comes ability to have 3 push buttons with LED (blue/white/yellow) or combination of pushbuttons and a green LED.
- GP Series Design Type 2 Safety Switches - plastic, up to 4 contacts, top & side actuator entry and 30 mm mounting.
- NM VZA Design Type 2 Safety Switch - plastic, 2 narrow body designs, up to 3 contacts, top & side actuator entry, 16.5 and 18 mm mounting.
- NP Series Design Type 2 Safety Switches - plastic, up to 2 contacts, top & side actuator entry and 20, 22 and 40 mm mounting.
- NX Series Type 2 Safety Switch - die cast aluminum, with 4 contacts, top and side actuator entry with 30 mm mounting.
- NZ Series Type 2 Safety Switch - EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. To meet current worldwide standards, safety interlock components cannot be easily bypassed.
- SGP Design Type 2 Safety Switches - EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. To meet current worldwide standards, safety interlock components cannot be easily bypassed.
- SGP Twin Series Type 2 Safety Switch - EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. To meet current worldwide standards, safety interlock components cannot be easily bypassed.
- - The EUCHNER Electronic Key System (EKS) allows only authorized personnel to access machine controls and process parameters. The uniquely coded inductive key tags, can providing various levels of authorization. The EKS FSA has additional switched outputs that can be utilized to form a safe shut-down signal.
- - Actuators, Accessories and Bolts
- Enabling Switches - Designed to operate in only one position enabling switches causing a stop condition in any other position (in accordance with NFPA 79). In
- ZSG, ZSE, ZXE - Euchner ZSG, ZSE and ZXE pushbuttons enabling switches are designed for use in pendant stations (HBA, HBE, HBL) and control panels provides a wide selection of two position (OFF-ON) (dead-man switch) and three position (OFF-ON-OFF) (live-man switch).
- ZSA - The black body handheld top button ZSA enabling switch provides complete range of switching contacts and cables in an ergonomic design.
- ZSR - The yellow body handheld front button ZSR enabling switch provides range of switching contacts for your needs.
- ZSB - The ZSB enabling switches provide extra function beyond an enabling switch. Features available on some ZSB enabling switches are E-stop, control pushbuttons, key selector switch and LED’s.
- ZSM - The ZSM enabling switch is more than trigger enabling switch. With modular design a large number of additional functions can be integrated including E-stop, LED’s and a key-operated switch. A special feature of the ZSM enabling switch is the new vibration signal that tells the operator whether the activated.
- Safety Modules
- AS Interface - asi gateway, asi module, asi safety switches, asi enabling, asi non-contact with separate actuator, asi non-contact with separate actuator and locking.
- GMO Profi Bus - The ASi Bus is a reliable way to implement safety devices on a communication bus. It can also be used to reliably activate outputs, such as locking solenoids. Data from all connected devices is transmitted through a two-wire cable to a safety controller.
- SMO - The ASi Bus is a reliable way to implement safety devices on a communication bus. It can also be used to reliably activate outputs, such as locking solenoids. Data from all connected devices is transmitted through a two-wire cable to a safety controller.
- SFM-A01 - Single-channel safety monitor with 2 safety contacts.
- SFM-A02 - Dual-channel safety monitor with 4 safety contacts.
- SFM-B01 - Dual-channel safety monitor with 4 safety contacts and enhanced functionality.
- SFM-C02 - Small, freely programmable, safe control system that can collect all safe signals using the ASI bus.
- ASI ZSA - The black body handheld top button ZSA enabling switch provides complete range of switching contacts and cables in an ergonomic design.
- ASI ZSB - The ZSB enabling switches provide extra function beyond an enabling switch. Features available on some ZSB enabling switches are E-stop, control pushbuttons, key selector switch and LED’s.
- ASI ZSM Enabling - The ZSM enabling switch is more than trigger enabling switch. With modular design a large number of additional functions can be integrated including E-stop, LED’s and a key-operated switch. A special feature of the ZSM enabling switch is the new vibration signal that tells the operator whether the activated.
- CES-A-ABA-01 - Evaluation unit allows for 1 readhead and a switch-on distance of 6mm
- CES-A-ABA-01B - Evaluation unit allows for 1 readhead and a switch-on distance of 15mm
- CES-A-AEA-02B - Evaluation unit allows for 2 readheads and can achieve safety category 4.
- CES-A-AEA-04B - Evaluation unit allows for 4 readheads and can achieve safety category 4.
- ASI CES Read-Act - Uniquely coded actuators read by readheads used in conjunction with the evaluation units with integrated bus interface.
- ASI Non-Contact -magnetic coding, transponder coding
- CMS non-contact - Non-contact systems that allow for the connection of maximum of 30 readheads.
- CMS-E-AR, CMS-E-DR - Non-contact systems that allow for the connection of a maximum of 30 readheads.
- CMS-E-BR, CMS-E-ER, CMS-E-FR - Non-contact systems that allow for up to 4 readheads to be attached. Have door monitoring and feedback capabilities.
- CES-A-AUBA-01 - Evaluation modules that allows for 1 readhead and multicoding
- CES-A-UBA-02B - Evaluation modules that allows for 2 readheads and multicoding
- CES-A-UBA-04B - Evaluation modules that allows for 4 readheads and multicoding
- Readhead Actuator - Non-contact coded magnets which are used in conjunction with the evaluation modules.
- CES-A-C5E and CES-A-C5H - Evaluation unit and readhead in one.
- CES-AR C - Evaluation and readhead in one that is suitable for systems on which a large number of safety doors need monitoring.
- CES-A-S5H - Evaluation unit and readhead in one.
- CEM - Non-contact unit that has a digitally coded actuator with electromagnet built into housing.
- CET Safety Switch - Non-contact locking transponder with guard locking.
- ESM Safety Modules - Compact housing, up to 3 Safety Contacts + 1 Aux, standard or time-delay expander modules as well as 2-hand control modules are available.
- ESM-FSafety Modules – Compact housing with simple plug-in and use modular design, up to 4 Safety Contacts, two wire GO input interconnection, plug-in connection terminals.
- Non-Contact – magnetic coding, transponder coding
- AS Interface "Safe-At-Work"
- Rope Pull Switches - EUCHNER Rope Pull Switch (RPS switch) provides redundant safety contacts with monitoring contacts. The RPS switch triggers with increase (pulling) or decrease (severing) in tension of safety cable or pushing of E-stop.
- Risk Assessment Software - Perhaps the most talked about subject regarding machine safety is just how much is enough. While many machines designers are familiar with the term risk assessment, they are uncomfortable with it’s ambiguous, broad parameters.
- Automation
- ID Coding Systems - EUCHNER Inductive Identification Systems permit contact-free identification of pallets, work pieces and parts in a dynamic manufacturing environment.
- Limit Switches - EUCHNER Limit Switches are used for the control and monitoring of Machinery and Industrial Equipment. Our limit switches offer a variety of actuator heads to fit your design requirements.
- - Narrow body plastic safety limit switch with up to 3 contacts and 6 different actuator heads.
- - Die cast aluminum safety limit switch with up to 4 contacts and 10 different actuator heads.
- - Cylindrical design enabling direct mounting inside a smooth or threaded hole.
- - Line of highly accurate positioning switches with 9 housing designs and 5 different plungers.
- - Line of highly accurate positioning switches with 8 housing designs and 4 different plungers.
- - Die cast aluminum limit switch with 2 contacts and 14 different actuator heads.
- Connectors - EUCHNER Plug Connectors are offered in both Metal and Plastic versions. They are suitable for use in control and instrumentation circuits. Many versions are available to fit your needs.
- Trip Dogs and Rails - EUCHNER Trip Dogs (Cams) and Trip Rails (Cam Trays) are used to actuate mechanical and inductive limit switches. The trip rail is mounted to a moving member and the trip dogs are fastened to the rail.
- Inductive Sensors
- Multiple Switches - EUCHNER Precision Multiple Limit Switches are used for the control and positioning of machinery and industrial equipment.
- Signaling Devices By Werma - EUCHNER-USA announces the addition of WERMA Signaltechnik to their present line of automation, safety and man-machine controls. WERMA, the European market leader in producing stack lights and audible & visual signals, also offers a line offsignals for hazardous locations.
- Signal Towers -Werma signal towers devices help to indicate processing stages, risks and potential dangers in modern manufacturing plants.
- Flashing LED Signal Tower Element - WERMA’s flashing LED signal tower element is an optimal light output using LEDs, no maintenance, low current consumption as well as resistance to shocks and vibration are the main features of the LED flash.
- EVS - Enhanced Visibility System - A groundbreaking innovation in LED technology opens up a completely new dimension in optical signaling.
- Self Adjusting Siren - WERMA’s self-adjusting siren element adjusts its sound output through continual measurement of the ambient noise level.
- Vocal Element - WERMA’s vocal element can replay sounds, songs and recorded spoken messages in MP3 format.
- GSM Transmitter Element - WERMA’s GSM transmitter element opens up completely new possibilities. Free yourself from your machinery and use monitoring time more effectively – even within your own plant.
- deSIGN 42 - WERMA’s LED signal tower deSIGN 42, with its high quality stainless steel housing is an ideal accompaniment to modern design oriented machines, uniquely combining cool elegance with optimal functionality.
- OEM Color Program for Signal Towers - WERMA’s OEM color program for signal towers give the possibility to order signal towers in the color of your choice.
- Kompakt 71 with USB Interface - Our USB interface terminal element is ideal for small applications where operating status (or machine faults) of a process is needed but a PLC or machine controller is not available.
- Optical Signal Devices - WERMA optical signal devices help to indicate processing stages, risks and potential dangers in modern manufacturing plants.
- Flashing LED Signal Tower Element - WERMA’s flashing LED signal tower element is an optimal light output using LEDs, no maintenance, low current consumption as well as resistance to shocks and vibration are the main features of the LED flash.
- 280 Rotating LED Beacon - Combining an extremely high intensity output with an eye-catching light effect is sure to get your attention. Couple these design features with the advantages of an LED light source and you can not miss!
- Externally Triggered 829 Beacon With Three Light Effects -WERMA’s externally triggered 829 series beacon with three light effects can be set by means of electrically isolated, binary coded 24V control cables.
- 885 Mid Sized Beacon With ˝” NPT or Flexible Mounting - Often times portable equipment (e.g. fork trucks, tow motors, AGVs, ect) require an eye-catching signal to warn personnel in the immediate area of its presence.
- Optical Audible Signal Devices - WERMA optical-audible signal devices use both elements of sight and sound to indicate processing stages, risks and potential dangers.
- 450 Combo Alarm with Acknowledgement - WERMA’s 450 combo alarm with acknowledgement in the occurrence of a malfunction or an error is indicated by means of an optical-audible signal.
- Audible Signal Devices - WERMA audible signals warn, protect and guide us in the modern industrial world in which we live. They come into their own where caution, prudence and clarity are essential .
- Self Adjusting Siren - WERMA’s self-adjusting siren element adjusts its sound output through continual measurement of the ambient noise level. The emitted tone of approximately 5 dB louder than the background sound level.
- Vocal Element - WERMA’s vocal element can replay sounds, songs and recorded spoken messages in MP3 format. Using the supplied USB connecting cable, the vocal element is simply linked up to a PC or laptop.
- 127 Buzzer - A new concept on sound compression allows the volume to be greatly increased in these compact sounders. With this design, the user makes the choice of continuous or pulse tone to help distinguish one machine from another in a densely populated work cell.
- 128 Buzzer - A new concept on sound compression allows the volume to be greatly increased in these compact sounders. With this design, the user makes the choice of continuous or pulse tone to help distinguish one machine from another in a densely populated work cell.
- 133 Multi-Tone Buzzer - A new design concept on sound compression allows the volume to be greatly increased in these compact multi-tone sounders. Eight distinct tones provide versatility in placing this sounder design into an existing application.
- 134 Multi-Tone Buzzer - A new design concept on sound compression allows the volume to be greatly increased in these compact multi-tone sounders. Eight distinct tones provide versatility in placing this sounder design into an existing application.
- 584 Horn - A new concept on sound compression allows the volume to be greatly increased in these compact sounders. Simplicity is the key to the overall look and function of this product series.
- 585 Horn - A new concept on sound compression allows the volume o be greatly increase in these compact sounders. Simplicity is the key to the overall look and function of this product series.
- Explosive Signal Devices - Signal horns, alarm bells, electronic buzzers, flashing beacons, double flash beacons, signal towers and horns, and rotating beacons
- ManMachine
- Pendant Stations - EUCHNER Pendant Stations are hand held control devices that allow tasks such as machine setup, troubleshooting and maintenance to be performed at the point of operation.
- Handwheels - EUCHNER Electronic Handwheels are Universal Pulse Generators used primarily for manual positioning of axes on CNC machinery.
- Joysticks - EUCHNER Industrial Joysticks are manually actuated motion control switches. They are used on equipment that requires operator control of one or more axes.
- Electronic Keys - The EUCHNER Electronic Key System (EKS) allows only authorized personnel to access machine controls and process parameters. The uniquely coded inductive key tags, can providing various levels of authorization.
- Catalog - view our online catalog.
- Company - EUCHNER’s history began in 1940 with the establishment of an engineering office by Emil Euchner. Since that time, EUCHNER has been involved in the design and development of switch- gear for controlling a wide variety of motion sequences in mechanical and systems engineering.
- - Euchner-USA was the first to offer a comprehensive safety seminar. The Safety Seminar introduces engineers to ANSI, OSHA, European Machinery Directives, and offers an explanation of "Risk Assessment" and European Conformance (CE).
- Distributor Login
|
|
Your shopping cart is empty
Get Started Now!
Search Site!
Site Tools
|
