Shock and vibration resistance	In acc. with EN 60947-5-3
Housing material
Housing	Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
Net	3,1 kg
Ambient temperature
At U_B = 24V DC	-20 ... 55 °C
Degree of protection	IP54
Mechanical life	1 x 10⁶
In case of use as door stop, and 1 Joule impact energy	0,1 x 10⁶
Installation orientation	Door hinge DIN left
Reaction time
Emergency stop / machine stop	max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Door position	max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Bolt position	max.550 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Switching frequency	0,25 Hz
Connection
	7/8" Power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
	7/8" Power (X2 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Acc. to IEC 61076-2-101, Profinet I/O cable, at least cat. 5e	M12 D-coded, screened (X3 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
	M12 D-coded, screened (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Current consumption	max.500 mA
Rated insulation voltage U_i	75 V
Rated impulse withstand voltage U_imp	0,5 kV
Maximum feed-in current in the connection block
X1, X2	max.4000 mA
EMC protection requirements	In accordance with EN 61000-4 and EN 61326-3-1
Degree of contamination (external, according to EN 60947-1)	3
Connecting cable
Ethernet	Profinet I/O cable, at least cat. 5e
Safety class	III
Transponder coding	Unicode
	Power supply X1
Operating voltage DC
L1	24 V DC -15% ... +10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Fusing
external	min.1 A Slow blow
	Power supply X2
Operating voltage DC
L1	24 V DC -15% ... +10% (For looping through for connected devices)
Auxiliary voltage DC
L2	24 V DC -15% ... +10% (For looping through for connected devices)

Bus data protocol	Profinet (IEC 61158 type 10)
Safety data protocol	Profisafe (IEC 61784-3-3)
Data interface
Ethernet

Assignment diagram	B1
Assignment diagram	L0

	Position 90
Version	Illuminated push buttons
Slide-in label
Special features
Color
Switching element	1NO

	Position 93
Version	Emergency stop illuminated
Slide-in label
Special features
Color
Switching element	2 pos. driven NC

	Position 95
Version	Illuminated push buttons
Slide-in label
Special features
Color
Switching element	1NO

Additional feature	Incl. cover set ID. No. 120344
Product version number	V3.30.10
Slide-in label	2 pcs. without marking

	Monitoring of the position of the safety guard
Category	4
Performance Level	PL e
PFH_D	4.07 x 10^-8 (Fixed failure rate without consideration of faults in wearing parts.)
Diagnostic Coverage (DC)	99
Safety Integrity Level	SIL 3 (EN 62061:2005)
	Emergency stop
B10_D
Emergency stop	0,13 x 10⁶
	Emergency-stop evaluation
Category	4
Performance Level	PL e
PFH_D	4.1 x 10^-8
Mission time	20

Assured release distance S_ar
Door position	max.65 mm

MGB-L0B-PNA-L-124128 (Order no. 124128)

Interlocking module and bus module MGB-L0...-PN with 2 control elements, 7/8" and M12 plug

Description

Profinet connection

Profinet RT switch

Illuminated emergency stop

Dimension drawing

Technical data

Approvals

Mechanical values and environment

Electrical connection ratings

Work area

Interface, bus

Controls and indicators

Other

Reliability values according to EN ISO 13849-1

Accessories

Downloads

Consent

An error has occurred.

Search