EUCHNER – More than safety.
EUCHNER – More than safety.

MGB-CB-PN-119111 (Order no. 119111)

Control panel MGB-...-PN with 13 switches, push-pull plug, connection for Stacklight, RC12

  • Control panel
  • Emergency stop according to ISO 13850, illuminated
  • 10 illuminated pushbuttons
  • including adhesive labels
  • Push-pull plug
  • Including terminal plug for Stacklight (M12, 8-pin)
  • Pre-assembled on mounting plates
  • Integrated Profinet RT switch
MGB-CB-PN-119111 (Order no. 119111)

Description

Profinet connection

Connection via push-pull plugs according to IEC 61076-3-117

Profinet RT switch

Point-to-point topology network structure due to integrated RT switch.

Illuminated emergency stop

Emergency stop with illumination that can be controlled as required.

Dimension drawing
Dimension drawing
MGB: The MGB-System in use
MGB: MGB Impact test
MGB: Mounting left door, with escape release
Mounting left door, without escape release
Mounting right door, without escape release
MGB: Deactivating guard lock monitor
MGB: Activating guard lock monitor
MGB: Activating release monitoring
MGB: Change color-lens push button

Dimension drawing

Dimension drawing

Technical data

Approvals

Zulassung EACZulassung TÜV Süd, BMPB mit ZG: Safety tested, Production monitored, Functional SafetyZulassung c_UL_us LISTED Class 2 or LV/CZertifikat ProfinetZertifikat Profisafe

Mechanical values and environment

Shock and vibration resistance In acc. with EN 60947-5-3
Housing material
Housing Reinforced plastic, die-cast zinc nickel-plated, stainless steel
Weight
Net 2,7 kg
Ambient temperature
At UB = 24V DC -20 ... 55 °C
Degree of protection IP54
Installation orientation Any
Reaction time
Emergency stop / machine stop max.250 ms Switch-off time (The reaction time is the max. time between the change in the input status and the deletion of the corresponding bit in the bus protocol.)
Switching frequency 0,25 Hz
Connection Push-pull power (X2 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
According to IEC 61076-3-117 variant 14, screened, Profinet I/O cable, at least cat. 5e Push-pull RJ45 (X3 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Push-pull RJ45 (X4 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))
Plug connector M12 (X6)
Push-pull power (X1 (The document PROFINET "Cabling and Interconnection Technology" from the PNO aids in the correct selection of wiring.))

Electrical connection ratings

Current consumption max.500 mA
Rated insulation voltage Ui 75 V
Rated impulse withstand voltage Uimp 0,5 kV
Maximum feed-in current in the connection block
X1, X2 max.4000 mA
EMC protection requirements In accordance with EN 61000-4 and EN 61326-3-1
Degree of contamination (external, according to EN 60947-1) 3
Connecting cable
Ethernet Profinet I/O cable, at least cat. 5e
Safety class III
Power supply X2
Operating voltage DC
L1 24 V DC -15% ... 10% (For looping through for connected devices)
Auxiliary voltage DC
L2 24 V DC -15% ... +10% (For looping through for connected devices)
Power supply X1
Operating voltage DC
L1 24 V DC -15% ... 10% ((Reverse polarity protected, regulated, residual ripple <5%, PELV))
Auxiliary voltage DC
L2 24 V DC -15% ... +10% (The auxiliary voltage is not required for the MGB system)
Fusing
external min.1 A Slow blow

Interface, bus

Bus data protocol Profinet (IEC 61158 type 10)
Safety data protocol Profisafe (IEC 61784-3-3)
Data interface
Ethernet

Controls and indicators

Assignment diagram B1
Assignment diagram C1
 
Position 10
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 11
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 12
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 13
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 14
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 15
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 16
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 17
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 90
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO
 
Position 93
Version Emergency stop illuminated
Slide-in label
Special features With adhesive ring
Color
Switching element 2 pos. driven NC
 
Position 95
Version Illuminated push buttons
Slide-in label
Special features
Color white
Switching element 1NO

Other

Product version number V3.30.10
Slide-in label 12 pcs. without marking

Reliability values according to EN ISO 13849-1

Emergency stop
B10D
Emergency stop 0,13 x 106
Emergency-stop evaluation
Category 4
Performance Level PL e
PFHD 4.1 x 10-8
Performance Level PL e
Category 4
Safety Integrity Level SIL 3 (EN 62061:2005)
Diagnostic Coverage (DC) 99
Mission time 20

Technical support

Technical support
Do you have technical questions about our products, their possible use or applications? Our experts will be happy to help.

EUCHNER USA Inc.
+1 315 701-0315
info(at)euchner-usa.com