HomeProductsTransponder-coded safety switches without guard lockingCES-AR safety switchCES-I-AR-F-C04-SG-161679
CES-I-AR-F-C04-SG-161679 (Order no. 161679)
Choose content
Safety switch CES-I-AR-.-C04-…, RFID, plug connector M8
- Fixcode evaluation
- Door position monitoring output OD
- Plug connector M8, 8-pin
Description
Approach direction and installation position
Permissible installation position
Typical operating distance
(only in combination with actuator CES-A-BBN-C04)
For a side approach direction for the actuator and safety switch, a minimum distance of s = 6 mm must be maintained so that the actuating range of the side lobes is not entered.
Attention:
The actuating range may vary depending on the actuator, substrate material and installation situation. You can find additional actuating ranges in the operating instructions.
Fixcode evaluation
An actuator included is permanently assigned to the switch. The switch can be operated only with this actuator. The actuator is taught-in at EUCHNER prior to delivery. No additional actuators can be taught in.
The system possesses a high coding level.
Safety characteristics
Due to two redundantly designed safety outputs (semiconductor outputs) with internal monitoring, the device is suitable for:
- Category 4 /PL e according to EN 13849-1
- SIL 3 according to EN IEC 62061 Table 4
The OSSD outputs used check their function for short circuits using test pulses.
LED indicator
STATE | Status LED |
DIA | Diagnostics LED |
Terminal assignment
| Plug connector (view of connection side) | Pin | Designation | Function | Connecting cable conductor coloring |
|---|---|---|---|---|
 | 1 | FI1B | Enable input, channel B | WH |
| 2 | UB | Electronics operating voltage, 24 V DC | BN | |
| 3 | FO1A | Safety output, channel A | GN | |
| 4 | FO1B | Safety output, channel B | YE | |
| 5 | OD | Monitoring output | GY | |
| 6 | FI1A | Enable input, channel A | PK | |
| 7 | 0 V | Ground 0 V DC | BU | |
| 8 | RST | Reset input | RD |
Plug connector aligned C04
The following applies to the device installation position shown: cable outlet C (left), cable outlet A (right).
Scope of delivery
- 2 x M4x20 safety screws
- Actuator CES-A-BBN-C04-115271
Dimensional drawings
| 1 | Active face |
| 2 | LED status indication |
| 3 | With rubber support |
| 4 | Coding lug |
| 5 | With the installation orientation shown: cable outlet on left or right |
Connection examples
Technical data
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | 10 % |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 30 V |
| Rated impulse voltage Uimp | 0.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 400 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Risk time according to EN 60947-5-3, extension for each additional device | max. 5 ms |
| Safety class | III |
| Current consumption | max. 35 mA (without taking into account the load currents on the monitoring output and the safety outputs) |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Monitoring output OD | |
| Output type | Semiconductor output, p-switching, short circuit-proof |
| Output voltage | 0.8 x UB ... UB V DC |
| Switching current | max. 50 mA |
| Safety outputs FO1A/FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| HIGH U(FO1A) / U(FO1B) | UB-1.5V ... UB V DC (Values at a switching current of 50 mA without taking into account the cable lengths.) |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24V 200mA (Caution: outputs must be protected with a free-wheeling diode in case of inductive loads.) |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 200 mA |
| Test pulse duration | max. 1.0 ms (Applies to a load with C<= 30nF and R<= 20kOhm) |
| Test pulse interval | min. 140 ms |
Mechanical values and environment
| Connection type | M8 plug connector, 8-pin |
| Tightening torque | |
| Fixing screws | max. 0.8 Nm |
| Ready delay | 10 s |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Storage temperature | -25 ... 70 °C |
| Mounting distance | |
| between switches | min. 80 mm |
| Mounting type | Surface mounting on metal |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67/IP69K |
| Ambient temperature | -25 ... 65 °C |
| Material | |
| Housing | Plastic, PBT |
| Rubber support | NBR 80 ±5 Shore |
Miscellaneous
| Notices for UL approval | Operation only with UL Class 2 power supply or equivalent measures |
| Additional feature | Rubber support included |
Actuator CES-A-BBN-C04-115271 (Order no. 115271)
Electrical connection values
| Power supply | Inductive via read head |
Mechanical values and environment
| Tightening torque | |
| Fixing screws | max. 0.8 Nm |
| Storage temperature | -25 ... 70 °C |
| Degree of protection | IP67/IP69K |
| Ambient temperature | -25 ... 65 °C |
| Material | |
| Housing | Plastic (PBT) |
| Rubber support | NBR 80 ±5 Shore |
Components included in the set
| Included accessories | 2x safety screws M4x20 |
In combination with actuator CES-A-BBN-C04-115271
| Switch-on distance | |
| Installation position A or B (front side) | 15 mm |
| Installation position C or D (broad side) | 11 mm |
| Secured switch-off distance sar | |
| in x/z direction | 40 mm |
| in y direction | 60 mm |
| Secured switching distance sao | |
| Installation position C or D (broad side) | 6 mm |
| Installation position A or B (front side) | 10 mm |
| Switching hysteresis | 1 ... 2 mm |
Accessories
Downloads
Complete package
Download all important documents with a single click.
Content:
- The operating instructions and any additions to the operating instructions or brief instructions
- Any data sheets to supplement the operating instructions
- The declaration of conformity
Download Complete Package (ZIP, 8,3 MB)
Single Documents
Declarations of conformity
EU-Konformitätserklärung
Doc. no.
Version
Language
Size
EU-Konformitätserklärung
Doc. no.
EDC2138020
Version
Language
Size
0,2 MB
UKCA-Konformitätserklärung
Doc. no.
Version
Language
Size
UKCA-Konformitätserklärung
Doc. no.
EDC20001471
Version
Language
Size
0,2 MB
Instructions
Operating Instructions Non-Contact Safety Switch CES-I-AR-.-C04/C14-… (Unicode/Multicode)
Doc. no.
Version
Language
Size
Operating Instructions Non-Contact Safety Switch CES-I-AR-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2119563
Version
13-02/25
Language
Size
2,1 MB
Mode d’emploi Interrupteur de sécurité sans contact CES-I-AR-.-C04/C14-… (unicode / multicode)
Doc. no.
2119563
Version
13-02/25
Language
Size
2,1 MB
Manual de instrucciones Interruptor de seguridad sin contacto CES-I-AR-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2119563
Version
13-02/25
Language
Size
2,1 MB
Betriebsanleitung Berührungsloser Sicherheitsschalter CES-I-AR-.-C04/C14-… (Uni-/Multicode)
Doc. no.
2119563
Version
13-02/25
Language
Size
2,1 MB
Istruzioni di impiego Finecorsa di sicurezza senza contatto CES-I-AR-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2119563
Version
13-02/25
Language
Size
2,1 MB
Návod k použití Bezkontaktní bezpečnostní spínač CES-I-AR-.-C04/C14-… (Unicode/Multicode)
Doc. no.
2119563
Version
13-02/25
Language
Size
2,5 MB
Other Documents
Approvals and certificates
ECOLAB
Doc. no.
Version
Language
Size
ECOLAB
Doc. no.
Version
Language
Size
0,5 MB
UQS CES-I-AR-.-C04…
Doc. no.
Version
Language
Size
UQS CES-I-AR-.-C04…
Doc. no.
ECO2119733
Version
Language
Size
0,2 MB
WEEE
Doc. no.
Version
Language
Size
WEEE
Doc. no.
ECO20001806
Version
Language
Size
0,1 MB
Sales documents
Flexibel sicher - Transpondercodierte Sicherheitssysteme CES
Doc. no.
Version
Language
Size
Flexibel sicher - Transpondercodierte Sicherheitssysteme CES
Doc. no.
119922
Version
06-06/22
Language
Size
8,4 MB
Flexibly safe - Transponder-coded safety systems CES
Doc. no.
Version
Language
Size
Flexibly safe - Transponder-coded safety systems CES
Doc. no.
120233
Version
06-06/22
Language
Size
7,3 MB
ePlan macros
EUC.161679
Doc. no.
Version
Language
Size
EUC.161679
Doc. no.
Version
Language
Size
0,2 MB
Ordering data
| Ordernumber | 161679 |
| Item designation | CES-I-AR-F-C04-SG-161679 |
| Gross weight | 0,085kg |
| Customs tariff number | 85365019000 |
| ECLASS | 27-27-24-03 Safety-related transponder switch |
