SAFETY

ASI CEM	ASI CES Read Head and Actuator	ASI CET Switch
ASI ZSA	ASI ZSB	ASI ZSM Enabling
CES Read Head Actuator	CET	CET-AR
CES-A-ABA-01	CES-A-ABA-01B	CES-A-AEA-02B
CES-A-AEA-04B	CES-AR C	CES-A-UBA-01
CES-A-UBA-02B	CES-A-UBA-04B	CES-A-C5E and CES-A-C5H
CES-AP	CES-A-S5H	CMS-E-AR, CMS-E-DR
CMS-E-BR, CMS-E-ER, CMS-E-FR	EGZ safety limit switch	EKS-FSA (Electronic Key System Safety)
ESH Hinge Switch	ESM Safety Modules	ESM-F Safety Modules
E-Stop	GMO Profi Bus	GP Series Design Type 2
Multifunctional Gate Box	NM Design Type 1	NM VZA Design Type 2
NP Series Design Type 2	NX Series Type 2	NZ..VZ..VS Design Type 2
NZ Design Type 1	NZ Series Type 2	Rope Pull Switches
SFM-A01	SFM-A02	SFM-B01
SFM-C02	SGP Design Type 2	SGP Twin Series Type 2
STA Design Type 2	STM Design Type 2	STF Design Type 2
STP Design Type 2	STP TWIN Design Type 2	TK Design Type 2
TP Series Solenoid	TX Series Solenoid	TZ Series Solenoid
ZSA	ZSG, ZSE, ZXE	ZSR

AUTOMATION

Cylinder Proximity Switch	EGT Single Hole Fixing	Inductive Identification Systems
Inductive Multiple	Inductive Single	NG Switch
NM Design Type 1	NZ Design Type 1	Plug Connectors
Precision Single Plunger	Precision Multiple	Trip Dog and Rails

866-547-7206

home > TK Solenoid Locking Safety Switch

TK Solenoid Locking Safety Switch

TK Solenoid Locking Safety Switch	View PDF	Download PDF	Specs / Buy
Plastic Accessories	View PDF	Download PDF

EUCHNER Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has dissipated. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts (in accordance to NFPA 79) and redundancy to guarantee that they fail to a safe state. The TK switch utilizes the same body as the TP switch however has a metal actuating head and locking pin. This unique switch does not require a separate actuator just a separate hole on the door opposite of the actuating pin of the switch.

Note: Design type 2 safety switch has an actuator that is separate from the switch body. The two must be combined or separated for switch operation.